Overview

PU5473 is an aliphatic polyurethane prepolymer for use as a rubber crumb binder. It has a fast cure speed and as such is ideal for play areas. PU5473 gives excellent UV resistance.
PU5473 has been formulated as a flexible moisture curing binder for in situ recycled rubber crumb shock pads and EPDM play surface topcoats, which are laid by hand.
PU5473 meets the requirements of BS7188:1998 when tested on virgin EPDM rubber at 18% binder addition levels.

 

Available in:
220kg drum
22kg plastic pail

Applications

  • Rubber crumb shock pads
  • EPDM topcoats
  • TPV topcoats
  • Aquatic waterparks
  • Rubber threshold ramps

See all applications in our Technical Data Sheet

See all applications in our Technical Data Sheet

How to use

  • Application Temperature

    +5°C until +40°C

  • Substrate Preparation

    Ensure the ground to be coated is well prepared. All loose material should be removed. Ensure the surface is free from contamination such as oil and grease. The surface should also be dry.

  • Mixing

    Mix rubber granules and binder PU4223CS at desired ratio. Ensure the volumetric ratio of binder addition is considered as the bulk density of rubbers will vary. Rubber granules should be dry in order to stop accelerated cure times and foaming of the binder.
    For adequate mixing, a high torque rotary mixer should be used. Rubber and binder should be mixed for up to 5 minutes ensuring all the rubber is coated.

  • Installation

    The product can then be laid out on a prepared surface and compacted using a hand trowel or weighted roller. Ensure an even compaction of the rubber. A release agent should be used on all tools to avoid adhesion of the binder to the tools. Ensure all equipment is cleaned well after use.
    In some cases, particularly low temperatures, D4861 Rubber Crumb Binder Accelerator may need to be added. Further details available on request.

Downloads

Technical Data Sheet

Rubber Crumb Brochure

FAQs

How long does it take for PU5473 to cure?

Cure time is approx. 5-6 hours at 20°C. The cure time will vary depending on the ambient temperature and relative humidity.

Is PU5473 UV stable?

Yes, PU5473 is based on aliphatic polyurethane technology and has excellent long-term UV performance.

Find the quality product you need

Product Finder