SabreFix ST Spray Contact Adhesive is a sprayable high strength contact adhesive for multi-purpose use in the construction and manufacturing industries. This easy application spray tack is suitable for internal and external bonding of most construction substrates.


Available in:
500ml Aerosol

Blue construction logo


  • Carpet & carpet tiles
  • Insulation
  • Concrete
  • Wood
  • Felt
  • Stone
  • Textiles & fabrics
  • Most joinery applications
  • Bonding metals to most surfaces
  • Bonding rubber
  • Most plastics

See all applications in our Technical Data Sheet

See all applications in our Technical Data Sheet

How to use

  • Permanent bonding:

    Shake can well before use. Spray both surfaces from 15-20cm away in the opposite direction. Allow to dry for 2 minutes before placing substrates together (allow more drying time in humid or cold conditions). Re-alignment is not possible. Apply adequate even pressure.

  • Temporary bonding:

    As above, but spray one surface only.

  • Cleaning spray nozzle:

    Clean nozzle following use by inverting the can and spray until nozzle is clear. If nozzle is clogged, soak in solvent for 60 seconds or use Sabre CC Citrus Cleaner.

  • Cleaning:

    To remove excess adhesive use Sabre CC Citrus Cleaner.