Overview
SabreSeal WP40 Fast Cure Adhesive Sealant is a premium MS Polymer sealant and adhesive designed for waterproof sealing and bonding applications. Formulated with anti-microbial and mildew-resistant properties, SabreSeal WP40 is ideal for environments where hygiene is critical.
Available in:
600ml Foilpack
300ml Cartridge
Applications
- Waterproof sealing in high humidity environments such as kitchens and bathrooms
- Sheet metal bonding and sealing
- Sealing concrete and masonry walls
- Perimeter sealing of window and door frames, external facades and cladding
- Sealing expansion and control joints in floors
- Fast cure bonding applications in prefab construction, sheet metal and vehicle assembly
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
How to use
- Surface preparation
Substrates to be clean of oil, dirt, contaminants and old sealant. Mask joint edges.
- Priming
Sabre Surface Activator may be used on non porous surfaces. Porous surfaces should be primed with Sabre Primer PX. We recommend preliminary compatibility tests previous to application.
- Application Temperature
+5°C until +35°C
- Method
Manual or pneumatic caulking gun.
Mask joint edges. Cut nozzle end at 45° angle to the desired opening. Cut end from cylinder bung leaving the thread. Screw nozzle to bung thread. Place in cylinder applicator gun. Insert nozzle into joint, squeeze trigger and push gun in a forward direction – never pull backwards as air may be trapped in joint preventing a good seal. Remove masking before skinning.
- Painting
SabreSeal WP40 is suitable for most paints -test for compatibility. For best paint bond, apply promptly after sealant cure.
