Overview

SabreBond XMP275 is a toughend hybrid polymer/epoxy-based two component structural adhesive. It has unique properties, combining the high mechanical strength, chemical resistance, and fast curing properties of epoxy, with the flexibility and adhesion range of hybrid polymer technology. XMP275 has a very short open time. The Resin and hardener react to form an elastomer with high bonding strength. The cured product has excellent water and chemical resistance. It also has the added health and safety advantage of no containing isocyanates or solvents.

SabreBond XMP275 is suitable for general industrial applications requiring high strength. It has excellent bonding performance on most substrates, such as steel, aluminium, copper, nickel-coated steel, PVC, ABS, PC, PA and PET etc.

 

Available in:
400ml Cartridge
200L Drums

Applications

  • Panel Bonding
  • Structural elastic bonding
  • General industrial bonding

See all applications in our Technical Data Sheet

See all applications in our Technical Data Sheet

How to use

  • Method

    Manual or pneumatic caulking gun.

  • Application Temperature

    +10°C until +30°C

  • Substrate Preparation

    Ensure substrates are clean, dry and free of dust and grease.

  • Priming

    When bonding, Sabre Surface Activator may be used on non-porous surfaces.
    When bonding or sealing porous surfaces (e.g., concrete), Sabre Primer PX is recommended. We recommend preliminary compatibility tests previous to application.

  • Application

    Mix the resin and the hardener before application. Ensure the correct mixing ratio and uniform mixing to obtain ideal mechanical and chemical properties. Make sure to prepare the right amount of adhesive, so that it can be used within the potlife. The product can be processed manually or by machine.

  • Cleaning

    Non-cured adhesive or the individual components can be removed with solvent. Pay attention to the compatibility of the substrate with the cleaner. Cured adhesive can only be removed mechanically.

  • Storage

    The product must be stored at temperatures between 10 and 30°C. Direct sunlight, heat, frost or moisture must be avoided. The material can be stored in the original sealed containers for 12 months.

Downloads