Overview

Sabre Primer PX is a solvent-based, 1-component primer developed for porous substrates. Designed for use with Sabre MS Polymer adhesives/sealants in joint sealing applications on concrete, metals, and timber materials.

 

Available in

1L Tin

Applications

  • Concrete
  • Aerated concrete
  • Metals
  • Timber
  • Granite
  • Fibre cement board
  • Plywood

See all applications in our Technical Data Sheet

See all applications in our Technical Data Sheet

How to Use

  • Application Temperature

    +5°C until +40°C

  • Substrate Preparation

    Ensure substrates are clean, dry and free of dust and grease. Cement laitance must be removed.

  • Application Method

    Apply Primer PX with a cleaner brush or roller to the substrate. It should only be applied once. Tightly reseal the container immediately after use.

  • Cleaning of Tools

    Clean all tools and application equipment immediately after use. Once cured, residual material can only be removed mechanically.

Downloads

FAQs

What is the flash-off time?

Sabre Primer PX should be left a minimum of 30 minutes to flash-off. The maximum time is 8 hours.

Do I still need to ensure substrates are clean before priming?

Yes, Sabre Primer PX is an adhesion promotor. It is not a substitute for correct surface cleaning procedures.

What lineal metres yield should I expect?

On porous substrates, estimated coverage is approx. 250 lineal metres. On non-porous substrates it is approx. 400 lineal metres.

Find the quality product you need

Product Finder