Overview

SabreSeal MS Facade Sealant is a high-performance Silyl Modified Polymer (MS) for paintable sealing of concrete, metal, glass, aluminium, timber, and many plastics. It can be used for indoor and outdoor joint sealing, facade cladding, joinery, tilt panel, and lap joints on flashing and roofing materials. SabreSeal MS Facade Sealant can be painted with most water-based paints.

SabreSeal MS Facade exhibits outstanding UV stability and has been externally independently tested by BRANZ for durability in NZ’s harsh environmental climate.

 

Available in:
300ml Cartridge (White/Grey)
600ml Foilpack (White/Grey/Black)

Applications

  • Construction joints
  • Concrete precast panels
  • ACM Cladding and facades
  • Aluminium joinery
  • Exterior cladding
  • Fibre cement sheeting
  • HVAC and sheetmetal
  • Coolstores
  • Roofing

See all applications in our Technical Data Sheet

See all applications in our Technical Data Sheet

How to Use

  • Method

    Manual or pneumatic caulking gun.

  • Application Temperature

    +5°C until +35°C

  • Substrate Preparation

    Ensure substrates are clean, dry and free of dust and grease.

  • Priming

    Critical applications such as multi-story buildings or exposed areas should be primed for optimal adhesion and durability. Prime porous concrete, AAC, and timber with Sabre Primer PX – leave to flash off for 30 min. Powder-coats & metals will require a light abrasion then be wiped with Sabre Surface Activator and left to flash off for 5-10 mins.

  • Tooling

    Soapy solution before skin formation.

  • Repair with

    SabreSeal MS Facade

Downloads

FAQs

Is SabreSeal MS Façade paintable?

SabreSeal MS Facade Sealant can be painted with most water-based paints. it should be noted that a wide variety of brands and chemical composition of water-based paints systems are available. It is therefore recommended that technical advice be obtained from the paint manufacturer and/or a limited-on site trial be undertaken prior to full application.

Do surfaces need to be primed before applying SabreSeal MS Façade?

SabreSeal MS Façade has excellent primerless adhesion to most common building materials. Critical applications such as multi-story buildings or exposed areas should be primed for optimal adhesion and durability. If you are unsure, conduct prior compatibility tests prior to full application, or contact Sabre technical support department for assistance.

Find the quality product you need

Product Finder