Overview
SabreSeal FRM Hybrid MS Fire Sealant is a single component sealant designed for fire-rated movement and connection joints. It is high performing with a fast, neutral and odourless cure, resulting in a permanently elastic fire resistant joint.
Available in:
600ml Foilpack
Applications
- Bonding most construction materials
- Fire resistant sealing of vertical joints in concrete tilt panel
- Applications that have high UV exposure
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
How to use
- Surface preparation
Substrate surface must be dry and clean; free of dirt, grease, oil, or standing water.
For a neat finishing, use masking tape and remove it within the working time.
For movement joints, use backing material to avoid 3 sided bonding.
- Method
Cut off the end of the sausage and insert into a manual or pneumatic gun. Place the sausage nozzle on top of the sausage, and screw on the cap. Cut back the nozzle to the required size. Apply adhesive sealant to the substrate.
For joint application: Insert nozzle into joint, apply adhesive sealant moving gun in a forwards direction – never pull backwards as air may be trapped in joint preventing a good seal. Tool the sealant within 2-3 minutes of extrusion before it skins.
- Clean Up
Remove excess sealant immediately with Sabre CC Citrus Cleaner. Ensure surface is solvent resistant before cleaning.
